Self Priming Bare Shaft Pumps

The centrifugal self-priming pumps series JCS-T have been designed to be coupled to diesel or gasoline engines and electrical motors, through a flexible joint. These groups of motor pumps or electric pumps are then suitable for heavy duty application with solids handling up to Ø74mm.

Description
Catalog
Purchase Form

For this series of pumps are the following:

Building industry:

Drainage of excavation sites, canals or ponds. Ground water dewatering with drains. Water supply from wells or canals. Washing concrete castings and aggregate. Recirculation of bentonite and drilling mud.

Treatment:

Pumping polluted, hot or corrosive waste water containing sand, mud or solids in suspension. Dosing neutralizing liquids. Pumping out settled sludge

Naval:

Loading and unloading. Bilge pumping; washing, fire-fighting, stripping, sanitary duty and circulation

Industry:

Transfer: clean, dirty, containing sand in suspension, muddy, neutral, alkaline, acidic liquids; low viscous petroleum products, solvents even if dirty; milk of lime, caustic soda; washing, cooling, recirculation, smoke.

Civil:

Transfer of muddy, chemical liquids with solids and particles in suspension. Fire-fighting. Sewerage system drainage.

Agriculture:

Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilizers; distribution of liquid animal feed; transfer of must; washing.

Safety:

Drainage after flooding or torrential rains.

Emergency duty: temporary sewage pumping; fire-fighting; recovery of dangerous liquids.

OPERATION:

Self-priming, Bare Shaft and direct flanged for dirty water
Max. Capacity	600 m³/h
Max. Head	60 m
Inlet/outlet	2” up to 10”
Solid handling	Up to 76 mm diam.
RPM	1000 to 3600
Suitable to be coupled directly or by flexible joint to: · Electric motor · Diesel engine · Gasoline engine