SUBMERSIBLE MOTORS

OIL FILLED SUBMERSIBLE MOTOR (0,75 HP – 30 HP)

4” Motor 0.75 HP – 3.0 HP (SINGLEPHASE) 0.75HP -10.0 HP (THREEPHASE)

6” Motor 5.5 HP – 30 HP THREEPHASE

FLOW SLEEVES

• Offers a complete range of stainless steel flow sleeves for both vertical and horizontal operation.
• Flow sleeves are recommended for all applications in which motor cooling is insufficient. The result is a general extension of motor life.
• Flow sleeves should be used: If the submersible pump is exposed to high thermal load like unbalanced current, dry running, overload, high ambient temperature, bad cooling conditions.
• If sedimentation or deposits occur around on request.

Note: More information about accessories is available on request.

WATER FILLED SUBMERSIBLE MOTORS (5,5 HP – 300 HP)

6″ SUBMERSIBLE MOTORS 5.5 HP – 60 HP (4 KW – 45 KW)

8″ SUBMERSIBLE MOTORS 30 HP – 150 HP (22 KW – 110 KW)

10″ SUBMERSIBLE MOTORS 100 HP – 250 HP (75 KW – 185 KW)

NEMA standard, rewindable, water cooled, stainless steel shaft /body, carbon radial and axial bearings submersible pump motors.

Zinc Anodes

Application

Zinc anodes are placed on the outside of the pump and motor as protection against corrosion. The number of anodes required depends on the pump and motor types.

Liquid temperatures

Sea water: Up to 30°C.

Brackish water (min. 1500g/m_ chloride): Up to 35°C.

Anode Life

The zinc anodes have a life of one to four years, depending on operating conditions (temperature, flow and chloride content).